Treadmill Calculator
Enter your weight, treadmill speed, incline and time. The calculator applies the ACSM walking or running equation, chosen automatically by speed or by you, to estimate oxygen use, MET value and calories, and converts your speed to pace per mile. Incline is part of the burn, so the same speed on a slope gives a different answer from the flat.
Checked on Rules used
Method note: this is a widely used method, not an official rule, and some of its figures come from secondary sources rather than the original paper.
How the treadmill calculator works
Result
How it was worked out
Fill in the fields above to see the result and every step here.
These calculators give estimates for general information. They are not medical advice and do not diagnose anything. Talk to a doctor or a registered dietitian before you change your training or eating, especially if you have a health condition. Method note: this is a widely used method, not an official rule, and some of its figures come from secondary sources rather than the original paper. Estimate only. Real results vary from person to person.
-
Checked on
Source: ACSM's Guidelines for Exercise Testing and Prescription, metabolic calculations (walking: 0.1 S + 1.8 S G + 3.5; running: 0.2 S + 0.9 S G + 3.5, S in m/min, G fraction); Katch-McArdle RMR = 370 + 21.6 x lean mass kg (McArdle, Katch and Katch, Exercise Physiology)
Method note: this is a widely used method, not an official rule, and some of its figures come from secondary sources rather than the original paper.
Worked example: flat versus incline
Someone who weighs 70 kilograms and walks at 3 miles an hour for 30 minutes on a 5 percent incline uses 18.8 millilitres of oxygen per kilogram per minute, a MET value of 5.4 and 197 calories, at a pace of 20:00 per mile. The same walk on the flat burns 121 calories.
Walking or running mode
The ACSM equations have one form for walking, VO2 = 0.1*S + 1.8*S*G + 3.5, and one for running, VO2 = 0.2*S + 0.9*S*G + 3.5. Running costs more oxygen per metre on the flat, while walking costs more for each percent of incline.
In automatic mode the calculator uses the walking equation below 5 miles an hour and the running equation from 5 miles an hour. That switch point is our convention, not part of the ACSM equations. If you jog slowly or walk fast, choose the mode that matches what you actually do.
Method and sources
Speed in miles an hour is converted to metres per minute at 26.8224 per mile an hour. Walking uses VO2 = 0.1*S + 1.8*S*G + 3.5 and running uses VO2 = 0.2*S + 0.9*S*G + 3.5, where S is speed in metres per minute and G is the incline as a fraction. Oxygen use becomes calories at 5 calories per litre of oxygen, and MET is oxygen use divided by the standard resting oxygen use. Automatic mode treats speeds from 5 miles an hour as running, which is our convention. Incline from 0 to 15 percent is accepted. The equations suit steady effort and not holding the handrails.
What it does not cover
- Treadmill calories use the ACSM walking and running equations, which are most accurate for walking at about one point nine to three point seven miles an hour and for running above about 5 miles an hour.
- The equations are accurate for steady effort, not for holding the handrails or very fast intervals.
- The automatic walk or run switch is our convention, and the equations are marked provisional in our data.
Rules and calculation checked on 11 Oct 2026.
Treadmill calculator FAQ
How many calories burned on a treadmill?
It depends on your weight, speed, incline and time. In the example, someone who weighs 70 kilograms and walks at 3 miles an hour for 30 minutes burns 121 calories on the flat and 197 calories on a 5 percent incline.
How do I read distance on a treadmill?
Distance is speed multiplied by time. In the example, 3 miles an hour for 30 minutes is 1.5 miles. Enter the speed and time shown on your treadmill and the calculator shows the same distance, plus your pace per mile.
How many steps on a treadmill?
This calculator does not count steps, because stride length varies from person to person. To estimate steps from your height and walking speed, use the steps calculator, which works out your stride and the steps in a mile.
See also: estimate steps from your height
Next steps: pace and walking
Enter weight, walking speed and time to see gross and net calories burned, the distance, and the MET value and Compendium code used.
Add a loaded pack and terrainEnter body weight, pack weight, speed, uphill grade, terrain and time to estimate rucking calories, and see how many come from the pack itself.
These results are estimates for general information. They are not medical advice and do not diagnose anything. Talk to a doctor or a registered dietitian before you change how you eat, train or sleep because of a number on this page.